Weltool T1 Pro TAC
This T1 Pro TAC is a mini tactical flashlight. Although it is only 9.7 cm,But can throw 290 meters and has 21,060 candela. Use one AA alkaline battery and NiMH battery, or you can add a BB7 extension tube to use two alkaline batteries or NiMH batteries to increase the brightness; you can also use one 14500 lithium-ion battery, which can reach 540 lumens. Comes with a stainless steel pocket clip that can be mounted on the flashlight body in two directions, making it easy to carry.
The T1Pro TAC has excellent throw and has a large area of spill; the tail forward switch allows frequent momentary and maintains high mode all the time. This flashlight also hides a low mode, which allows you to view documents and equipment at close range in dark environments to maintain dark adaptation and situational awareness, especially suitable for lightweight tactical use.
Aluminum alloy CNC machining, hard anodized
Coated tempered glass lens, stainless steel sandblasted bezel
5000K High Density X-LED
Aluminum alloy reflector
(AA alkaline batteries)
(One14500 Lithium Ion Battery)
Can use 1 AA alkaline battery, AA Ni-MH battery, Energizer L91 lithium battery, 14500 Li-ion battery; you can also buy Weltool BB7 extension tube to use 2 AA alkaline batteries or Ni-MH batteries.
The body has two holding positions at the front and rear, with a stainless steel pocket clip
Tail forward switch
Flashlight with battery polarity protection
No noise and no flicker
Passed the 1-meter drop resistance test, IP67, can be used in heavy rain
Each flashlight has its own serial number
Size (±0.5mm): (head diameter) 20mm, (barrel diameter) 18mm, (length) 97mm
Weight excluding battery: (±0.5g) 43g
Install the battery correctly first
Press the switch halfway in the off state to turn it on by default in high mode. Release the switch to turn it off. Press the switch firmly and the "click" sound will lock the high mode. Press the switch firmly again to turn off the flashlight.
In the off state, press the switch halfway for more than 4 consecutive times to enter the low mode. At this time, press the switch firmly to lock the low mode. After turning off the low mode and turning the flashlight on again, the high mode will be turned on by default.