Skip to content
Free shipping on orders over $75
Free shipping on orders over $75

ReyLight Pineapple Brass

Sold out
Original price $ 59.00 - Original price $ 59.00
Original price
$ 59.00
$ 59.00 - $ 59.00
Current price $ 59.00

Free shipping for orders over $75. Most orders ship within 24hrs. Any order containing lithium batteries is at risk of abnormal shipping delays.

ReyLight Pineapple Brass


The ReyLight Pineapple Brass comes with a rechargeable 14500 battery.   (Unprotected cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.)

All ReyLight Pineapple Brass flashlights are polished and cleaned, then sealed in a vacuum bag. Though it might still be patina in the bag.

Specs:

  • Material: Solid brass
  • Nichia 219B SW45K R9080
  • Reverse polarity protection
  • LVP (low voltage protection) for Li-ion battery
  • Temperature control to avoid overheating problems
  • Anti-reflective coated lens
  • Aluminum alloy  reflector
  • Easy clicky switch operation
  • Tail-stand capability
  • Pocket clip
  • Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm)
  • Weight: 3.3 oz (93 g) without battery
  • Spare O-rings
  • 1 tritium slot (optional)

Programming Guide

1. Turn on the light.

2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.

a. 1 blink: mode group selection. Press the button to enter this menu.

i. 1 blink: (ML)-2%-20%-100%

ii. 2nd blink: (ML)-10%-40%-100%

iii. 3rd blink: (ML)-2%-10%-50%

iv. 4th blink: (ML)-50%-100%-strobe-SOS

It then repeats. Press the button during any blink to select that mode group.

b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.

c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight mode off. Repeat to turn moonlight on.

d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.

e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.

Shortcut: quick double-tap to turbo.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)