Ultra High Performance 1200 Lumen EagleTac P25LC2 CREE XM-L2 U2
A big leap forward from its predecessor P20. The all-new P25 series is redesigned from ground up. It features better heatsink, more rigid built, higher output, better interface, and better looking. P25 series retain the popular LED module upgrade ability like the P20 series
Mil-Spec Para-cord Lanyard w/ quick attachment clip
CR123A Battery Magazines
Heavy Duty Nylon Holster with flip
User removable tailcap lanyard ring
1200 LED Lumen
Powered by the top binned CREE XM-L2 U2 Cool White. The D25LC2 Tactical gives you the maximum brightness output in its class. Neutral white output color is also available with CREE XM-L2 N.W. T6 LED.
200+ hours runtime
Get maximum continuous runtime with the lowest output of 4lm, which is enough to last through weeks. Get 1.5 hours of runtime at the maximum output level. The intermediate 510/103lm level offers 3.5/20 hours of runtime.
Low dropout & highly efficient circuit
To enhance the current regulated runtime with single li-ion battery, we used the latest IC and high-end passive components to minimize the internal resistance and the dropout voltage of the circuitry.
High current output
The new C3200L TS circuitry offers 50% more current output compared to the Clicky series. More output = More lumen!
Deep reflector design
230 yards beam distance
We use special and custom made machinery tooling to make the deepest reflector possible. Deeper reflector means more reflective surface for converting more spill output into the spot beam.
Twisty head & forward clicky switch
One press for MAX or MIN output
With head tighten/loosen, turning on the flashlight will always get you the maximum/minimum output power.
Four pre-defined output
Turn the head to access three common output levels. You can pre-select your desired output before turning on the light. A quick twist will get you the lowest level (4th level). This makes it especially useful when you are in a dark environment and need to preserve your adapted night vision or need maximum runtime.
Head Diameter 1 inch
Body Diameter 0.85 inches
Length 4.9 inches
Weight 2.1 ounces
1x18650 or 2xCR123A2
Compatible battery (diameter/length)
Tactical forward clicky switch
Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
To access the lowest 4th level, turn the head to 3rd level, then 2nd level, and then back to 3rd level within one second.
You can pre-selected output level before turning on the light.
Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.
Output and Runtime
Four brightness levels
Led lumen: 1200-980/510/103/4
ANSI FL-1 lumen: 920-755/420/83/3
1.5/3.5/20/200+ hours (1x18650)6
0.8/2/10/130+ hours (2xCR123A)
CREE XM-L2 Cool White U2 LED
We (EAGTAC) warrant our flashlights to be free from defects in workmanship and materials. We will repair, replace at our option, without charging any product or part which is found to be defective under normal use within 120 months from the date of purchase with the proof of purchase.
Electronics, chargers and rechargeable batteries are covered for a period of 12 months with purchase receipt. Such repair or replacement shall be the purchaser’s sole and exclusive remedy under this warranty. Normal wear and tear including batteries draining is not covered, nor is damage resulting from modification, misuse, abuse, neglect, battery leakage, improper maintenance or repaired by anyone other than EAGTAC.