Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.
The D3 clicky Ti is machined from titanium rod and brass cube with CNC and hand polished to a mirror-like finish.
D3A clicky Ti uses all-new high output upgraded A750 RC LED driver. It features a high efficiency, clicky and twist head operation, programmable lower-low output mode, optional mode memory, hidden auxiliary modes, and most importantly fully supports single Li-ion 14500.
We offer the highest and the latest bin available LED for maximum output. Get the XM-L2 U4 for max output, XP-L HI V3 LED for throw and Nichia 219C CRI-92 neutral white LED for the best color output.
New D3 body style
LED Copper MCPCB star board with DTP technology and direct heat path
Solid brass heatsink
Titanium built and glossy polished finish
Features very smooth thread
A750 circuit w/ Li-ion support
Programmable last mode memory and lower-low settings
Pre-select output before turning on
White switch boot mixed with glow-in-the-dark powder
Harden surface treatment
EAGTAC D3A Clicky Ti
AA/14500 flashlight. Must have for titanium collectors.
Uses XP-L HI / XM-L2 U4 LED, or Nichia 219C 4000K CRI-92 LED.
405/232/16/2 LED lumen (XM-L2 U4)
286/167/11/2 ANSI FL-1 lumen (XM-L2 U4)
353/199/15/2 LED lumen (XP-L HI V3)
260/145/11/2 ANSI FL-1 lumen (XP-L HI V3)
Runtime: 1/2.2/35/150+ hours
2,050 lux @ 1 meter HI LED | Beam distance: 99 yards (91 meters)
Twist head for group output, clicky switch for on/off and modes
Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Lower low output -With "Lower low" function disabled, lowest (second lowest) output will increase by about three (two) times. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. Read more here.
* Using 3.7V li-ion significantly increase the LED output and heat. Limit each usage to five minutes or less at high and turbo output. Hold the light in your plam to help removing heat from the LED. If you find the flashlight too warm to hold, turn off the light, or lower the output to allow it to cool down. Do not leave the light running unattended.
* D3A Ti head is made in one piece, and therefore its glass lens is not user replaceable.