Skilhunt High-CRI 4500k M200 V3
Skilhunt M200 V3 LED Options:
Nichia 519A Neutral White High CRI R9080 CCT 4500K
Samsung LH351D Neutral White High CRI R9050 CCT 5000K
CREE CW : 1400 Lumens
Max runtime: Few months
Quiescent Current ：38μA
Max beam distance: 188m
Max peak beam intensity: 8900 cd
Impact resistant: 1 Meter
Battery: 1×18650 , 2 × CR123A ( Battery Not included by default )
If you choose the battery option we will include the EVVA Protected 18650 NCR18650GA 3500mAh 10A li-ion Battery
Rated Range: 2.7V ~ 8.4V
Length 104.5mm / 4.11 inch
Head diameter 23.5mm / 0.93inch
Weight: 46 g / 1.62 oz (without battery)
Accessories: 1*M200, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual.
1.Super bright & latest LEDs, More options for LED. Max 1400 Lumens
2.Removeable multi-directional pocket clip.
3.Rugged indestructible aluminum body with anti-scratching type III hard anodization
4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6.Easy to operate multi-function switch
7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
9.Intelligent temperature control technology for flashlight stable and safe use.
10.Reverse polarity protection, to protect from improper battery installation.
11.When light lockout, location indicator will flash, easy get the light in dark.
12.Magnetic tail, can be used in many special occasions, use as candle light, etc.
Please make sure that the positive pole of the battery points to the head of the flashlight
when you replace the battery.
How to use
Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode.
2. CHANGE BRIGHTNESS LEVEL
When the flashlight was OFF status:
Single click switch to memory level (H-M1-M2).
Quickly double clicks switch to Turbo(T1/T2) mode.
Quickly triple-click switch to Strobe(S1/S2/S3) mode.
Hold press switch 0.5 second to Low(L1/L2) mode.
When the flashlight was ON (T1/T2, H/M1/M2, L1/L2)
Press and hold the switch to automatically cycle, the level is selected when the side
switch has been released, turn off memorized.
When the flashlight was ON (T1/T2, H/M1/M2)
Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat
quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch
transfer Strobe mode, repeat quickly triple clicks switch back to previous mode.
When the flashlight was ON (S1/S2/S3)
Quickly double clicks switch tranfer S1-S2-S3, turn off memorized.
3.LOCK-OUT FUNCTION & LOCATION INDICATOR
When the flashlight is off , quickly click switch 4 times to access the button lockout
mode (location indicator activation at same time,the indicator light flash every second.
Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button
unlock and activate memory Low mode.
4. LOW VOLTAGE INDICATOR
When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds.
When the battery voltage drops below 2.7V, the light will turn off.