Skilhunt High-CRI 5000k M150 V2


M150 V2 magnetic charging flashlight

LED: High-CRI 5000K Samsung LH351D
Max output: ANSI 750 Lumens
Max runtime: Few months
Max beam distance: 110 m (14500) / 61 m (Ni-MH)
Max peak beam intensity: 3000 cd (14500) / 930 cd (Ni-MH)
Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×14500 , 1x AA (14500 Li-Ion Rechargeable Battery Included)
Rated Range: 0.8V ~ 4.2V
Dimension:
Length 84.0mm / 3.30 inch
Head diameter 21.0mm / 0.82 inch
Body diameter 18.0mm / 0.71 inch
Weight: 34 g / 1.20 oz (without battery)
Accessories: User manual, Spare O-rings, Lanyard, Clip, Magnetic Charging Cable.

Operation
1. Battery installation & magnet replacement:
Insert the battery positive pole toward the light head, otherwise, it will not work. When the light turning on, the beam is directed away from the eyes. When taking the light with Bankcards(magnetic) or cellphone, should replace the Magnet with the rubber pad.

  1. Turn-ON/OFF & Mode transfer

Transfer Mode A / Mode B:

When the headlamp is turned off without lockout, hold press side switch 5 seconds, the light will flash three times faster then flash three times slow.

 

Mode Group A

When the flashlight was OFF status:

Click the switch to memorized the brightness level.

Quickly double click switch to Turbo(T1/T2).

Quickly triple-click the switch to Strobe(S1) mode.

Press switch 0.5 seconds to Low(L1/L2) mode.

 

When the flashlight was ON(any mode) status:

Press and hold the side switch 0.5 seconds to turn off.

 

  1. Brightness & mode selection:

Brightness level:

Press side switch to Low-Mid-High-Turbo, cycle.

Quickly double press the side switch to Sub-level(i.e between L1 & L2), turn off memorized the last brightness.

Quickly triple press to Special modes.

 

Special modes:

Quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side switch back to previous brightness level.

 

Mode Group B

When the flashlight was OFF status:

Click the switch to memorized the brightness level.

Press switch 0.5 sec, to L2.

Quickly double click switch to Turbo(T1) mode.

Quickly triple press to Special modes(S1).

 

When the flashlight was ON(any mode) status:

Click the switch to turn off.

On Common used levels(Editable):

Hold press switch, brightness levels automatic cycle, and selected mode by button released. Click the switch to turn off.

Quickly triple press enter to Edit levels.

On Special modes:

 

Quickly double click switch to transfer mode S1/S2/S3,click switch to turn off.

Hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high.

Quickly triple press to restore to the factory default flash modes.

 

Edit Levels:

— Support to 2 ~ 7 common used levels can be selected

–Enter to edit level, 7  levels circle automatically. The selected level, side switch indicator is on. Not selected brightness, side switch indicator is off.

–Factory’s default levels: L2-M2-H2-T2. The indicator light on synchronously when levels automatic cycles.

–Selected / Not selected brightness, Click side switch to turn on / off the corresponding indicator.

 

-. All selected finished, hold press 1 second the side switch save selected and quit edit mode. The light will be flash three times, and back to the lowest selected level.

-. Restore the factory default levels: Enter to edit level, then click side switch three times. (Light will be turned off after three clicks.)

 

4.Location indicator & Lock-out function

When turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click switch only can switch the indicator on/off, the indicator light flashes every second, locate the flashlight, Easily find the flashlight in the dark quickly. Press switch 1.5 sec, switch unlock, and enter into low mode.

 

  1. Power indicator

Every time turn on, the side indicator will be light 5 seconds to display the battery power.

Blink four times: battery power in 100%~80%;

Blink three times: battery power in 80%~50%;

Blink twice: battery power in 50%~20%;

Blink one time: battery power below 20%.

Features
1. Super bright & the latest Samsung LH351D, Max 750 lumens. High-Performance, High-Efficiency, and energy conservation.
2. New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure, and temperature resistance.
3. The built-in magnetic charging system, fast charge, and convenient.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization
5. Multi-level dissipating heat design and new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6.Side switch button to transferring mode user-friendly interface to adjust output.
7. Two-mode groups to meet different use habits, suitable for different environments.
8. A wide input range provides more choices for batteries. High-efficiency driver circuit, no visible flash in any mode.
9. Automatic memory function, remember last used setting, and can be preset to specific output mode for instant access.
10.Intelligent temperature control technology for flashlight stable and safe use.
11. Reverse polarity protection, to protect from improper battery installation.
12. When turning off, hold press button to activate the lockout function. Avoid light turn on by unexpected.
13. When light lockout, the location indicator will flash, easily get the light in dark.
14. Magnetic tail, can be used on many special occasions, use as candlelight, etc.


Subscribe to our newsletter!