D25A2 Tactical flashlight
Mil-Spec Para-cord Lanyard w/ quick attachment clip
Stainless steel pocket clip (Titanium coated)
Heavy Duty Nylon Holster with flip
User removable tailcap lanyard ring
Uses 2xAA Alkaline batteries, Lithium e2, or NiMH/NiCD.
Operating Voltage Range: 2.7V to 3.0V (NO Li-ion!)
A big leap forward from its predecessor P20. The all-new P25 series is redesigned from ground up. It features better heatsink, more rigid built, higher output, better interface, and better looking. P25 series retain the popular LED module upgrade ability like the P20 series.
470 LED Lumen
Powered by the top binned CREE XM-L2 U2 Cool White. The P25A2 gives you the maximum brightness output in its class.
100+ hours runtime
Get maximum continuous runtime with the lowest output of 4lm, which is enough to last through weeks. Get 1.5 hours of runtime at the maximum output level. The intermediate 178/29lm level offers 4.5/25 hours of runtime.
High current output
The new A1000 TAC circuitry offers maximum ouput of 1amp and offers up to 90% efficiency in boost mode.
Controlled brightness levels
A1000 TAC offers well defined output levels regardless of battery voltage. Never have to worry about loosing your lower output levels with fresh alkaline or lithium AA batteries again.
Deep reflector design with 140 yards beam distance
We use special and custom made machinery tooling to make the deepest reflector possible. Deeper reflector means more reflective surface for converting more spill output into the spot beam.
Twisty head & forward clicky switch
One press for MAX or MIN output
With head tighten/loosen, turning on the flashlight will always get you the maximum/minimum output power.
Four pre-defined output
Turn the head to access three common output levels. You can pre-select your desired output before turning on the light. A quick twist will get you the lowest level (4th level). This makes it especially useful when you are in a dark environment and need to preserve your adapted night vision or need maximum runtime.
Head Diameter: 1 inches (25.4 mm)
Body Diameter: 0.8 inches (20 mm)
Length: 6.2 inches (157 mm)
Weight: 2.6 ounces (77 grams)
CREE XM-L2 Cool White U2 LED
LED lumen: 470
ANSI FL-14 lumen: 362
Output and Runtime
Four brightness levels
Led lumen: 470/363/178/29/4
ANSI FL-1 lumen: 330/258/126/21/3
Runtime: 1.4/4.5/25/100+ hours6
Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)
We (EAGTAC) warrant our flashlights to be free from defects in workmanship and materials. We will repair, replace at our option, without charging any product or part which is found to be defective under normal use within 120 months from the date of purchase with the proof of purchase.
Electronics, chargers and rechargeable batteries are covered for a period of 12 months with purchase receipt. Such repair or replacement shall be the purchaser’s sole and exclusive remedy under this warranty. Normal wear and tear including batteries draining is not covered, nor is damage resulting from modification, misuse, abuse, neglect, battery leakage, improper maintenance or repaired by anyone other than EAGTAC.