EagleTac DX30LC2

Eagletac DX30LC2

A big leap forward from its predecessor D25 series. The all-new DX30LC2 model is redesigned from the ground up. It packs mega output and a convenient side button switch in a marvelous compact body. The innovative user interface allows the user to turn on the flashlight at maximum or lowest output at will.



1160 LED Lumen
Powered by the top binned CREE XP-L HI V3 Cool White LED. The DX30LC2 gives you the maximum brightness output in its class. Neutral white output color is also available via a custom order if not listed.


150+ hours runtime
Get maximum continuous runtime with the lowest output of 10lm, which can easily last through weeks with continuous usage when it's dark. Get 1.5 hours of runtime at the maximum output level. The intermediate 590/221/77 lumen level offers 2.8/8.5/28 hours of runtime.


C3200L SC

Low dropout & highly efficient circuit
To enhance the current regulated runtime with a single Li-ion battery, we used the most cutting-edge step-down IC and high-end passive components to minimize the internal resistance and the dropout voltage (<0.2V) of the circuitry.

High current output
The new C3200L TS circuitry offers 50% more current output compared to the D25 Clicky series. More output = More fun!

Deep reflector design

One smooth beam
The dome-less throw-oriented XP-L HI LED offers a nice beam output without any visible donut or beam artifacts.

284 yards beam distance
We use special and custom-made machinery tooling to make the deepest reflector possible. A deep reflector means more reflective surface for converting more spill output into the spot beam.

Dual switches system

Turn on at MAX or MIN output
Press the tailcap switch to turn on the flashlight at MAX output. Or, hold the side button switch while pressing the tailcap switch to turn on at LOW output. You can also momentarily turning on the flashlight.

Five brightness levels
With flashlight turned on, press the side switch button switch to switch to the next brighter output level. At any level, press and hold the side switch for more than three seconds to enter the hidden auxiliary blinking modes.


Battery Type
▪ 1x18650 or 2xCR123A2
▪ Compatible battery (diameter/length)
◦ 123A: (16-16.8mm/34-34.5mm)
◦ 18650: (18-18.8mm/67-68.5mm)
▪ Read precaution with li-ion batteries.
Operating voltage
▪ 2.7V - 6V
▪ All batteries are connected in series. Do not exceed 6V. Do not use two rechargeable 3.0/3.7V RCR123A.

What's included

▪ DX30LC2 flashlight
▪ Spare o-rings
▪ User Manual
▪ Mil-Spec Para-cord Lanyard w/ quick attachment clip
▪ CR123A Battery Magazine
▪ Comes with stainless steel bezel
▪ Removeable silver pocket clip made of spring steel w/ harden treatment
▪ Heavy duty nylon holster

Subscribe to our newsletter!